KNX HVAC Module

KNX HVAC Module belongs to HDL KNX/EIB series, and it supports control of heating, cooling, high/medium/low fan speed. 7 independent floor heating control channels can be set. In conjunction with digital temperature sensor, the actuator achieves precise temperature control. In addition, 5 switch output channels and 2 DC0-10V output channels can be set for staircase lights and other requirements.

Category:

Description

Model:M/FCU01.10.1
KNX HVAC Module belongs to HDL KNX/EIB series, and it supports control of heating, cooling, high/medium/low fan speed. 7 independent floor heating control channels can be set. In conjunction with digital temperature sensor, the actuator achieves precise temperature control. In addition, 5 switch output channels and 2 DC0-10V output channels can be set for staircase lights and other requirements.

 

 

Features

■ 7 independent floor heating control channels;
■ Up to 7 digital temperature sensors supported;
■ 5 relay output channels;
■ 2 DC0-10V output channels (10mA/CH);
■ Fan speeds: High, Medium, Low
■ Working modes: Heating, Cooling
■ Operation modes: Comfortable, Standby, Night, Protection
■ Main functions: Fan speed, Valve status report, Local 7 channels temperature sampling, Local temperature report, Operation time statistics, Channel status response, Power-on status recall, Power-off status saving, Staircase lights, On/Off delay, Protection delay, PWM control output
■ Active control and passive control: More flexible to work in conjunction with panels by different manufacturers. When in active control mode, this module can work in conjunction with panels without PI algorithm, for example M/DLP04.1. When in passive control mode, this module can work in conjunction with panels with algorithm, for example Siemens 5WG1.

Parameters

Basic Parameters

  • Working voltage 21~30V DC Class 2
  • Working current 20mA /30V DC
  • Input voltage 120V/240V AC(50/60Hz)
  • Communication KNX
  • Detecting temperature range -30℃~+100℃
  • Temperature sensor 2.5m Digital Temperature Sensor (TS/C 1.0) Communication KNX
  • Output terminal Line in, line out cable for each channel 2.5-4mm2
  • Output channel 5CH/10A
  • 0-10V output 2CH/10mA
  • Cable diameter of KNX terminal 0.6 – 0.8mm
  • Electrical life time >100000
  • Mechanical life time >100000

External Environment

  • Working temperature -5℃~45℃
  • Working relative humidity ≤90%
  • Storage temperature -20℃~60℃
  • Storage relative humidity ≤93%

Specifications

  • Dimensions 90mm×72mm×64mm
  • Net weight 310g
  • Housing material Frame-retardant nylon
  • Installation 35mm DIN rail installation
  • Protection rating (Compliant with EN 60529) IP2
TOP
Open chat